Barnboy
Member
Okay, well that's no fun 
2022 ROXOR hood release.
- Thread starter EazyDoesIt
- Start date
WY_ROX
Active member
- Joined
- Aug 18, 2023
- Messages
- 113
- Points
- 28
- Location
- Jackson Hole, Wyoming
- Roxor Ownership
- Roxor Owner
Yeah mine is leaking/loosing coolant as well. It seems to be loosing it quicker in the past few weeks. I can see where it’s dripping from a few connections on the hoses, but can’t seem to resolve it with tightening them..
Barnboy
Member
My lower radiator hose was the first leak. I removed the hose, roughed up the plastic with Emery cloth then used the old black permatex with a spring loaded clamp. That seemed to fix that connection. The next was the radiator hose on the thermostat housing. I just double clamped that one. 3 rd was the heater core bypass valve. Just a simple tightening on that. Good luck chasing leaks. I thought it was just me. I never had a cooling system so hard to contain before 
Barnboy
Member
A 4 psi cap brings the boiling point down to 226. I don't know what the OEM cap is but I think I'm going to look at the psi rating on mine and reduce the psi. The little diesel will never reach 226.
Rode
New member
I’m having same issue release will not hold it in position to open hood. Had to put something behind the lever to hold so I could open hood. Otherwise it’s a two person job. Is there an adjustment that can be made to the cable that pulls the release or is it just another bad design flaw ?
USMC
Active member
- Joined
- Jul 1, 2024
- Messages
- 474
- Points
- 43
- Location
- Naples Florida
- Roxor #
- 09848
- Roxor Ownership
- Roxor Owner
I would try one of these. 1 is Amazon and 2 is KaiserWillys.
1. BYOBYO 55176732ADCar Engine Hood Up Spring Assembly.
2. Chrome Hood Lock Pin Spring And Retainer Kit Fits 46-64 Truck, Station Wagon, JeepsterItem # 661366K
1. BYOBYO 55176732ADCar Engine Hood Up Spring Assembly.
2. Chrome Hood Lock Pin Spring And Retainer Kit Fits 46-64 Truck, Station Wagon, JeepsterItem # 661366K
Rode
New member
I will see what can find out. For now I have a stick I put behind lever to hold in place so I can open by myself
